free web hit counter

Step 2 Pick a network and connect

Way 3: Forget the Wi-Fi network and reconnect

If you can see the Wi-Fi network on your device when facing the unable to joinnetwork error, you can try this troubleshooting.Step 1. Go to “Settings” > “WiFi” and select the disabled Wi-Fi network on thelist.Step 2. Next, tap “Forget This Network” button and then hit “Forget” on theconfirmation dialog.Step 3. Then back to the Wi-Fi screen, choose the network and enter thepassword to rejoin it on your device.

IP address conflict

IP address conflict happens when two or more devices are assigned the same IPaddress . When this happens, both the devices cannot connect to the network.You can release and renew the IP address for your computer using the commandprompt. 1. Press Windows key +X. 2. Select Command Prompt(admin) . 3. At the prompt, go ahead and type in the following command, which will release your IP address:

How to Enable MAC Address Filtering on JioDongle

After login into the jiofi.local.html or jiofidongle web page to enable theMAC address. Click on the setting in the menu at the top. Select the networkon the left menu. Now enable the MAC address filter. Now select allow to allowthe MAC address filter mode. To add the MAC address click on the add button.Click Apply.

Outdated network driver

Sometimes an old network driver or corrupted one can lead to no internet onconnected WiFi problem . Windows 10 gets updated regularly and sometimes thedrivers of your computer are outdated to communicate with Windows . In orderto fix network driver problems 1. Press Window+R keys and enter “devmgmt.msc” to open “Device Manager.” 2. Expand Network adapters. 1. Find your Wireless network adapter. 2. Right-click and select Update Driver software. 1. Select Search automatically for updated driver software.Windows will search for a newer driver and install it.

How to regain internet access after setting up a bridge connection

To regain access to the internet from the host computer do the following: 1. Use the Windows key + X to open the Power User menu and select Network Connections. 2. Right-click the bridge adapter and select Properties. 3. Select the network adapter that connects to the internet. 4. Select Internet Protocol Version 4 (TCP/IPv4). 5. Click Properties. 6. Select the Use the following IP address option. 7. Use the IP address information you collected at the beginning of this guide to assign a static IP address like is shown in the screenshot below. 8. Click OK. 9. Click Close to complete the task.

How to change mac address atheros wireless adapter?

To be able to change the MAC address of your wireless adapter simply followthese steps.First take a look at your MAC ADDRESS, go to start menu and type in the searchbox “cmd” or simply press “Windows key + r” then on run type in cmd. On thecmd window type “ipconfig/all” and hit enter. You will now then see the listof all your IP and the mac address of your wireless adapter.Then to change the mac address, go to desktop and point the mouse in”Computer” then right click and choose “Manage” and look for device manager.Another way is go to control panel, click “hardware and sound” and under theDevices and Printers look for “Device Manager”.Now on device manager, click “Network and Adapters”. It should expand. Thenchoose your wireless adapter right click on it and choose properties. Inproperties, window go to Advanced tab and look for the Network address andchoose value instead of Not present then type in your desired Mac Address inthe box and hit OK.

Step 2: Pick a network and connect

Connect to an open networkSelect the Wi-Fi network.Remember, your information might be visible to other people on this network.Connect to an unlisted networkImportant: When you add a “Hidden network,” others may be able to identifyyour device and learn which hidden networks are configured on your device.Administrators may hide networks so only certain people can use them. Toconnect to a hidden network: 1. Select Join other network . 2. Enter the network information in the box that appears. 3. Select Connect.Information for this network is automatically saved so you can connectautomatically later.Connect to a WPA2 enterprise network”

0 Comment

Leave a comment